A2SAN-LN4-C

Low Power
Embedded

Key Features


  1. Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 socket
  2. Intel® Celeron® Processor J3455 (10W, 4C)
  3. Quad LAN with Intel® Ethernet Controller I211-AT
  4. Intel® Goldmont microarchitecture 14nm System-on-Chip
  5. Supports 12V DC power input
  6. 3 M.2 B-Key 2242/3042 with nano SIM slot, 1 M.2 E-Key 2230
  7. 2 USB 3.0 ports, 2 USB 2.0 ports, 1 SATA 3.0, SMBus
...
...

Optimized Servers


Specifications Resources Parts List
Specifications
Product SKUs
MBD-A2SAN-LN4-C
Physical Stats
Form Factor
  • 3.5" SBC
Dimension
  • 5.87" x 4.17" (14.9cm x 10.6cm)
Processor
CPU
  • Intel® Celeron® Processor J3455
  • Single Socket FCBGA-1296 supported, CPU TDP supports Up to 10W TDP
Core
  • Up to 4 cores, 4 threads / 2MB Cache
Note
System Memory
Memory Capacity
  • 1 DIMM slots
  • Up to 8GB Unbuffered non-ECC SODIMM, DDR3-1866MT/s
Memory Type
  • 1866 MT/s non-ECC DDR3 SODIMM Unbuffered DDR3L up to 8GB
DIMM Sizes
  • 2GB, 4GB, 8GB
Memory Voltage
  • 1.35V
On-Board Devices
Chipset
  • System on Chip
SATA
  • SoC controller for 1 SATA3 (6 Gbps) ports
Graphics
  • 1 Intel® HD Graphics port(s)
Network Controllers
  • Quad LAN with Intel® Ethernet Controller I211-AT
Input / Output
SATA
  • 1 SATA3 (6Gbps) port(s)
LAN
  • 4 RJ45 Gigabit Ethernet LAN ports
USB
  • 2 USB 2.0 port(s) (2 via header)
  • 2 USB 3.0 port(s) (2 rear)
Video Output
  • 1 HDMI port(s)
Serial Port
  • 1 COM Port(s) (1 header)
Others
  • 1 SMBus header
  • 1 System Fan
  • 1 onboard M2 active LED
  • 1 onboard GbE LAN active LED
Expansion Slots
PCIe
  • N/A
M.2
  • Key: B-Key, E-Key
System BIOS
BIOS Type
  • AMI UEFI
BIOS Features
  • ACPI 6.0
  • SMBIOS 3.0
  • UEFI 2.5
  • PCI FW 3.0
Management
Software
  • SuperDoctor® 5, Watchdog
System Management Software
  • SuperDoctor 5
Power Configurations
  • ACPI Power Management, +12V DC Power Input, Control of power-on for recovery from AC power loss, Force Power On by Jumper
PC Health Monitoring
Voltage
  • VBAT, System temperature, System level control, 3.3V standby, +5V, +3.3V, +12V, +1.35V, VCGI
LED
  • Standby alert LED
Temperature
  • CPU thermal trip support
FAN
  • 1x 4-pin fan header (up to 1 fan)
  • Thermal control tachometer fan connectors
  • System level control
  • PWM fan speed control
  • Low noise fan speed control
  • Fan speed control
Other Features
  • WOL, System level control, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management, 8-pin 12v DC power connector
Operating Environment
Operating Temperature Range
  • 0°C - 60°C (32°F - 140°F)
Non-Operating Temperature Range
  • -40°C - 85°C (-40°F - 185°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non Operating Relative Humidity Range
  • 10% - 95% (non-condensing)
Resources
Parts List

A2SAN-LN4-C

  1. Products
  2. Motherboards
  3. A2SAN-LN4-C

Certain products may not be available in your region