X11SCE-F

MicroCloud

Key Features


  1. Single socket H4 (LGA 1151) supports Intel® Xeon® processor E-2100, E-2200, Intel® 8th Gen. Core™ i3 series, Intel® Celeron® and Intel® Pentium®
  2. Intel® C246 chipset
  3. Up to 128GB Unbuffered ECC UDIMM DDR4 2400MHz; 4 DIMM slot
  4. 1 M.2 PCIe 3.0 x4 Form Factor: 2280/22110
  5. 1 VGA, 2 USB 2.0, 1 COM via KVM dongle
  6. 4 SATA 3.0 (RAID 0, 1, 5, 10) or 2 U.2 NVMe drives
...
...

Optimized Servers


Specifications Resources Parts List
Specifications
Product SKUs
MBD-X11SCE-F
Physical Stats
Form Factor
  • Proprietary
Dimension
  • 4.6" x 11.7" (11.68cm x 29.72cm)
Processor
CPU
  • Intel® Celeron®, Intel® Pentium®, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor, 8th Generation Intel® Core™ i3 Processor
  • Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 80W TDP
System Memory
Memory Capacity
  • 4 DIMM slots
  • 128GB Unbuffered ECC UDIMM, DDR4-2666MT/s
Memory Type
  • N/A
DIMM Sizes
  • 4GB, 8GB, 16GB, 32GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
  • Intel® C246
SATA
  • Intel® C246 controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • HDD Fail detection via IPMI
Graphics
  • 1 ASPEED AST2500 BMC port(s)
  • Via KVM Connector
Network Controllers
  • Single LAN with Realtek RTL8211E PHY (dedicated IPMI), via Backplane
Input / Output
LAN
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 2.0 port(s) (2 rear)
  • USB 2.0 via KVM Connector
Video Output
  • 1 VGA port(s)
Serial Port
  • 1 fast UART 16550 Serial
  • 1 COM Port(s) (1 rear), Via KVM Connector
DOM
  • 1 SuperDOM (Disk on Module) port with build power
TPM
  • 1 TPM Header
Others
  • 1 KVM Connector for VGA
  • 1 USB 0 and COM Ports
Expansion Slots
PCIe
  • 1 PCIe 3.0 x8 (Micro Low Profile)
M.2
  • M.2 Interface: 11 SATA/PCIe 3.0 x4
  • Form Factor: 2242/2280/22110
  • Key: M-Key
System BIOS
BIOS Type
  • 256MB UEFI
BIOS Features
  • ACPI 6.1
  • SMBIOS 2.8
  • SMBIOS 3.1
  • UEFI 2.7
  • USB Keyboard support
  • Plug and Play (PnP)
Management
Software
  • SuperDoctor® 5, NMI, SUM, KVM with dedicated LAN, Intel® Node Manager, IPMI2.0, Watchdog, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
System Management Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support, SUM
Power Configurations
  • Power-on mode for AC power recovery, ACPI Power Management, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss
PC Health Monitoring
Voltage
  • VBAT, System temperature, System level control, Supports system management utility, Monitors CPU voltages, Memory, HT, +5V standby, +5V, +3.3V, +12V, +1.8V, Monitors for CPU Cores, Memory Voltages
LED
  • UID/Remote UID
  • Power LED
  • BMC/IPMI Heartbeat LED
  • CPU / System Overheat LED
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
  • I2C temperature sensing logic
FAN
  • Thermal control tachometer fan connectors, System level control, PWM fan speed control, Fan speed control, Pulse Width Modulated (PWM) fan connectors, Overheat LED indication
Other Features
  • WOL, UID, System level control, RoHS, Node Manager Support, M.2 NGFF connector, Control of power-on for recovery from AC power loss
Operating Environment
Operating Temperature Range
  • 0°C - 50°C (32°F - 122°F)
Non-Operating Temperature Range
  • -20°C - 60°C (-4°F - 140°F)
Operating Relative Humidity Range
  • 10% - 85% (non-condensing)
Non Operating Relative Humidity Range
  • 10% - 95% (non-condensing)
Resources
Parts List

X11SCE-F (For SuperServer Only)

Certain products may not be available in your region