X11SSW-4TF

Intel® QSV &
VHD with GT2

Key Features


  1. Single socket H4 (LGA 1151) supports Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen. Core™ i3 series,
    Intel® Celeron® and Intel® Pentium®
  2. Intel® C236 chipset
  3. Support Intel® VHD with selected CPU
  4. Up to 64GB Unbuffered ECC UDIMM DDR4 2400MHz; 4 DIMM slots
  5. M.2 NGFF connector
    M.2 Interface: PCIe 3.0 x4
    Form Factor: 2260, 2280, 22110
    Key: M-Key
  6. 6 SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10
  7. Quad LAN w/ Intel® X540 10GBase-T
  8. I/O: 1 VGA, 2 COM, TPM header
  9. 2 SuperDOM with built-in power
  10. 5 USB 3.0 (2 rear, 2 via header(s), 1 Type A),
    6 USB 2.0 (2 rear, 4 via header(s))
...
...

Optimized Servers


Specifications Resources Parts List
Specifications
Product SKUs - Discontinued SKU (EOL). Please contact sales-rep for replacement SKUs.
MBD-X11SSW-4TF
Physical Stats
Form Factor
  • Proprietary
Dimension
  • 8" x 13" (20.32cm x 33.02cm)
Processor
CPU
  • Intel® Celeron®, Intel® Pentium®, Intel® 7th/6th Generation Core i3 series, Intel® Xeon® processor E3-1200 v6/v5
  • Single Socket Socket H4 (LGA-1151) supported, CPU TDP supports Up to 80W TDP
Note
  • BIOS version 2.0 or above is required to support 7th Generation Intel® Core™ i3 Processors and Intel® Xeon® Processor E3-1200 v6 series
System Memory
Memory Capacity
  • 4 DIMM slots
  • 64GB Unbuffered ECC UDIMM, DDR4-2400MT/s
Memory Type
  • 2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes
  • 4GB, 8GB, 16GB
Memory Voltage
  • 1.2V
Error Detection
  • Corrects single-bit errors
On-Board Devices
Chipset
  • Intel® C236
SATA
  • Intel® C236 controller for 6 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
  • ASPEED AST2400 BMC
Graphics
  • 1 ASPEED AST2400 BMC port(s)
Network Controllers
  • Quad LAN with Intel® X540 10GBase-T Ethernet Controller
Input / Output
SATA
  • 6 SATA3 (6Gbps) port(s)
LAN
  • 4 RJ45 10GBase-T ports
USB
  • 6 USB 2.0 port(s) (4 via header; 2 rear)
  • 2 USB 3.0 port(s) (2 rear)
  • 3 USB 3 port(s) (2 via header; 1 type A)
Video Output
  • 1 VGA port(s)
Serial Port
  • 2 COM Port(s) (1 header; 1 rear)
DOM
  • 2 SuperDOM (Disk on Module) power connector
TPM
  • 1 TPM Header
Expansion Slots
PCIe
  • 1 PCIe 3.0 x16 Left Riser Slot
M.2
  • M.2 Interface: PCIe 3.0 x4
  • Form Factor: 22110, 2280, 2260
  • Key: M-Key
System BIOS
BIOS Type
  • 128MB SPI Flash EEPROM with AMI BIOS
BIOS Features
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • APM 1.2
  • DMI 2.3
  • Hardware BIOS Virus protection
  • PCI 2.3
  • Plug and Play (PnP)
  • RTC (Real Time Clock) Wakeup
  • SMBIOS 2.7.1
  • UEFI 2.3.1
  • USB Keyboard support
Management
Software
Power Configurations
  • Power-on mode for AC power recovery, ACPI Power Management
PC Health Monitoring
Voltage
  • VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V
LED
  • UID/Remote UID
  • CPU / System Overheat LED
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor 2 (TM2) support
  • PECI
FAN
  • 6x 4-pin fan headers (up to 6 fans)
  • Thermal control tachometer fan connectors
  • Fan speed control
  • Overheat LED indication
Other Features
  • WOL
  • M.2 NGFF connector
  • CPU thermal trip support for processor protection
  • Control of power-on for recovery from AC power loss
  • VHD
Operating Environment
Operating Temperature Range
  • 0°C - 50°C (32°F - 122°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Resources
Servers (Optimized for X11SSW-4TF)
Chassis
Component Options
Software
Documentation
Parts List

X11SSW-4TF

  1. Products
  2. Motherboards
  3. X11SSW-4TF

Certain products may not be available in your region